Uncategorized

Progress Update: Sneak Peek of the Pro Edition Slim

The long hours are paying off.  Over the course of the past year spent long nights writing code, finding bugs, networking with aftermarket EFI manufacturers to come up with a product that is cost competitive in the market.

Here is a sneak peek at the NexGenEFI Pro Edition Slim digital dash.

Power is supplied from your vehicle at 12V along with Ground and various inputs to the ECU interface which is connected to the remote mount display via CAT5e cable.  The CAT5e cable supplies data and power to the display.

The PCB can be moved a distance away from the display.  NexGenEFI, LLC will supply a 3′ CAT5e cable but additional lengths will be available.

5″, 7″ and 10″ versions will be available along with something special that is being designed.  I would even go out on a limb and say this special thing is even better than the 10″ display.  

Stay tuned, there is still additional layouts to add which are already designed and cleaning up code for the current EFI systems which are supported.

On the to-do list is additional EFI systems to support and “Layout Packs” which can be added to the display.

Pro Edition Slim, 7"
Ampseal version on the LEFT, Pro Edition Slim on the RIGHT

Progress Update

ECU Support

Holley EFI has been added to the list.  Terminator X, Dominator, Terminator X Max.   Where RacePak protocol can be used, I am going to utilize that. 

Test data from a Terminator X from a running vehicle and non-running was taken to ensure accuracy. 

Haltech, Link and other ECUs are coming up next!

NexGenEFI Pro Edition Slim

Going to be moving to the printing phase.  PCB passed tests.  What this does is it enables me to have the smallest possible PCB, less heat, less power draw than the Ampseal version.

Its about the size of a credit card.

Thanks to our new Slim PCB design, we are empowered to create innovative products within the NexGenEFI Ecosystem, ensuring they are cost-competitive in the automotive industry.

Pro Edition Slim PCBs, rear view

Beta Testing Underway

Megasquirt, FuelTech, MaxxECU and ECUMaster are heading out for testing.  7″ and 10″ displays are being used in this effort.  Feedback will be prioritized in a Must-have, Should-have and Would-like to have categories and will be worked accordingly.

Release Date

December 1st is the release date for the Pro Edition Slim Series.  The Ampseal version will be phased out.  Please follow the Facebook page for a demo of the Slim Series to see why its the product to go forward with.

NexGenEFI Stickers!
Beta Tester version

Custom Dash Bezels

NexGenEFI, LLC can also design and produce professionally crafted custom dash bezels for your vehicle.  

Progress Update

Pro Edition Series

The 7″ and 10″ Pro Edition displays are going to undergo testing by a select few Beta Testers.

These Pro Edition setups have an Ampseal connector along with a harness which will support inputs from CANBus ECUs and Serial ECUs, blinkers, headlights, TPMS, Bluetooth GPS and fuel level sending units and a super bright 16 LED light bar which can be configured by NexGenEFI for your needs.  Case is a made in ABS for durability and UV resistance.

Pro Edition Slim Series

5″, 7″, 10″ display solutions! Another custom PCB has been designed and is undergoing testing.  This PCB was designed to enable the End User to remote mount their display a few feet from the custom PCB in a low-profile ABS case.  The Slim Series is ONLY for CANBus enabled ECUs and has the same inputs and LED light bar as the Pro Edition series.

Super secret project coming up!
There is one solution that is fixing to get started as soon as testing on the Slim Series PCB is complete.  No beans shall be spilled early on this one! 😉

NexGenEFI, LLC proudly supports all EFI manufacturers and will at no charge write code to support additional ECUs with purchase of a display.  If you are an EFI manufacturer and would like to carry our products with your system, please email us.

PCB testing has begun!

Internal testing has begun on the custom PCB!  All development will now shift to this board.  Super happy with this milestone!

Scroll to top